1. INSTRUMENT INTRODUCTION

1.1 Principles of treatment

1. The principle of OPT hair removal: The principle of OPT photon hair removal is to use strong pulsed light with a broad spectrum of 610-1000nm, which can Pulse modulation has a wide range, so it can permanently remove skin and hair on various parts of the human body with different colors and different depths. hair.

2. The principle of freckle removal: use strong pulsed light to extract and decompose deep skin pigments, and use RF to promote lymphatic drainage Part of it is eliminated by the skin' s metabolism.

3. The principle of skin rejuvenation, whitening, wrinkle removal, pore shrink-age, and lifting: using strong pulsed light and RF radio frequency to stimulate-the dermis of the skin The fibrous tissue promotes the proliferation of collagen and accelerates the rearrangement of cell tissue, so as to achieve skin rejuvenation, whitening, wrinkle removal, The effect of shrinking pores and lifting.

4. The principle of removing red blood streaks: using strong pulsed light to coagulate the capillaries of skin lesions, and RF radio frequency can accurately-lock Determine the lesion site, so that the pulsed light can play a stronger role. Removal through skin and lymph metabolism the goal of. The blood vesseIs are clear after the red blood is done, and the color purple is the best.

1. OPT slide fast hair removal

2. Skin rejuvenation, wrinkle removal, depigmentation

3. Improve skin texture, make skin smooth and delicate, and enhance skin elasticity

4. Improve dull complexion, make skin white and even color

5. Treatment of pigmented scars (freckle, sunburn)

6. Treatment of pitting pigment left by acne

7. Treatment of vascular diseases, red blood streaks, etc.

1.2 Instrument advantages

+ Painless: continuous light, painless hair removal

+ Fast: super large area of light spot, sliding operation

+ Non-invasive: no trauma to skin tissue

+ Safety: can effectively avoid the side effects of strong light, and greatly reduce the difficulty of operation

+ Efficacy: It can be applied to a wider range of customers, the immediate effect is more obvious, and the long-term effect is longer.

1.3 instrument parameters

Laser wavelength	Magneto- Optical wavelength	input power	laser power supply	cooling system
532nm, 755nm, 1064nm	Adaptive	1200W	220/110V	Water cooling + Air cooling + Semiconductor refrigeration

1.4 Appearance of the instrument and interface description

positive display	side display

1.5 operating system:

2. INSTRUMENT SAFETY

caveat

You must fill up the water before turning on the machine, otherwise the treatment gun will be burned. When adding water, the vent will be opened and the water will be added from the filling hole. Water coming out of the vent hole means full water.

2.1 Machinery safety

+ This equipment is a movable equipment, before the product is operated and used, the movable casters are set to the locked state.

+ Unless otherwise specified, the equipment must not be operated with the-chassis open.

+ When installing/unplugging all accessory plugs of the instrument, be sure to tighten the screw lock on the plug clockwise/counterclockwise The needle is loosened.

2.2 Operational safety

1. Must be operated by professionals or trained personnel.

2. Before using the radio frequency, make sure that the probe is in good con-tact with the skin, and before leaving the probe, be sure to release the hand-le button.

3. If adverse reactions occur during the use of the instrument, stop using it immediately.

4. Please unplug the power cord after use to ensure safety.

5. Do not unplug the power cord directly during the operation of the instrument.

6. Please unplug the power plug when maintaining the instrument.

2.3 Eye safety

+ All personnel at the treatment site must wear protective eyes.

+ Avoid strong light in your eyes.

+ The instrument must be set to standby mode when paused during operation to prevent accidental emission of light.

+ Only when the beam is aimed at the hair removal area can you press the foot switch and the handheld device to trigger.

2.4 Fire safety

+ Remove the hair from the depilated area. If necessary, place only gauze soaked in saline near the depilated area.

+ Make sure that the fire extinguisher is readily available.

+ Avoid using flammable paper products.

+ Do not use the system in the presence of flammable substances or soothing milk.

3. TREATMENT INSTRUCTIONS

3.1 Before surgery

1. Consultation: communicate well with customers before treatment, what k-ind of treatment they have received, what are their reactions during treatment, Have a history of allergies to ensure that the treatment can achieve the b-est results and the psychological needs of customers.

2. Identify the skin problems of customers, the number and depth of wrinkles, the thickness of pores, whether there are red blood streaks, and what are they What type of skin, what type of spots (deep, superficial, flaky, punctate) , and whether the spots are congenital or posterior God, is it still spreading, is the color continuing to deepen?

3. Cold gel: clean the treatment area, apply cold gel evenly, the thickness is 1mm, nose and forehead Thicken the area (for hair removal projects, the hair must be shaved after cleaning the treatment area,

4. Power on operation: remove the bald head and place it below the body, turn on the emergency power on, and use the key to power on repeatedly 2-3 times, To ensure the normal operation of the machine, touch the bald head to see if it is cool, first do a sensitivity test on your arm or hand.

5. Technical parameters: Before doing it, it is necessary to test sensitivity for customers. When adjusting energy parameters, in principle, it must be adjusted from low to high (It is better to adjust no more than 2 energy points each-time), and at the sa-me time according to the color of the customer's skin Small energy parameters, lighter colors can choose larger energy parameters) Consult and observe customers' feelings and reactions while doing Yes, if the customer feels a slight thorn or heat.

3.2 Intraoperative

1. Take pictures and archive before and after surgery for comparison.

2. Clean the skin of the treatment area. During the treatment, please close y-our eyes or put on a protective eye mask for the customer. Spread the cold gel evenly.

3. Choose the corresponding energy parameters according to different skin colors, skin thickness and pigment depth.

4. Test allergy in areas with mild symptoms or fair skin.

5. During the treatment, the head should not be emptied, and it must be in full contact with the skin, but not heavy, and keep the bald head perpendicular to the skin surface. Lift the skin to prevent light leakage, and find the correct fit angle when treating the nose, cheekbones, and forehead. In operation, Take the face as an example. From bottom to top, from outside to inside, each spot presses one-third of the other spot, evenly arranged Column, after every 4 or 5 light spots, stop and carefully observe the skin changes. Repeat for the more severe symptoms treatment.

6. The treatment should always touch whether the bald head is still cold. If t-he bald head is hot, stop the operation immediately and lower the bald head-below At the body, let the refrigeration system fully circulate. Do not stick the skin for a long time during the treatment to prevent the bald head from being too cold Hurt the skin.

3.3 Postoperative

1. Apply light energy conditioning cream after treatment to make the treatment effect better and more obvious, and promote recovery. Cold spray can be implemented to reduce, Reduce customer symptoms.

2. After applying pure natural (plant-based) care products after treatment, us-e sunscreen (SPF20) or higher.

3. After finishing, observe the customer for half an hour before letting him leave.

4. OPERATING INSTRUCTIONS

1. Make sure that the client is lying relaxed on the beauty bed and wearing protective goggles.

2. Clean the skin, clean the makeup residue and sunscreen on the skin.

3. Record the current number of pulses to calculate the accumulated energy.

4. Select the appropriate parameters, set the parameters and keep them.

5. Inspect the gun body to ensure that the gun body is in freezing state.

6. Put the handle perpendicular to the skin so that it is in full contact with the-skin.

7. Random skin tests are required to observe skin reactions after hair removal.

5. CONTRAINDICATIONS

The following people are not suitable for using this instrument for nursing:

1. Pregnant women, hypertension, heart disease, diabetes

2. It is forbidden for people who are allergic to light

3. People with open wounds

4. Do not do during menstrual period

6. MAINTENANCE AND TROUBLESHOOTING

6.1 Maintenance

1. Keep the instrument clean at all times. Clean the instrument after each us-e and put a dust-proof cloth cover on the instrument housing. The surface of the instrument can be wiped with a soft cloth.

2. The instrument should be operated by trained personnel. After the instrument is started, it is not allowed to leave without authorization. Full-time personnel regularly check the host and Attachment to keep it in good condition.

3. Avoid harmful gases and corrosive liquids from flowing into the instrument, and water in the main unit strictly to avoid leakage caused by short circuit. Electric accident.

4. The use environment of the whole machine should be a dry and ventilated-place.

5. The instrument is delicately bumped, and the inside of the instrument is a-precision electronic circuit, please do not open it without authorization.

6.2 troubleshooting

failure phenomenon	causes	exclusions and solutions
Device not working	The power plug is not inserted into the socket  The power switch is off power fuse failure	Check power check the power switch Replace the fuse
The handle does not work	Is the number of probes used up? The working head is damaged the interface on the back of the instrument is not installed correctly	Check the number of probes replace working head re-install